Gas Stove 4-burner range

Gas Stove TGC-8
size of packaging:79*77*52cm
20feet:88units about
40feet:180units about

Gas Stove TGC-8

1. It is made with High-quality stainless steel

2.It is well assembled, and will not leave out any foods broken pieces

3. Good quality oxidation cast iron oven

4. Fitted with safety guarded thermocouple wire

5.Adjustable power

6. Adjustable high quality stainless steel feet .

Head of the Oven:

7. The burning element is made with cast iron,

chromium-plating on the surface

8.The loop of the burning element is made with brassiness,

which can stabilize the flame.

9. Changeable nozzle is suitable for various of gas.

product introduction

Gas Stove TGC-8

paramiter:

gas class:PLPG(natural gas,coal gas)

fuel value:92mj

gas flow:0.49 m3/h

tube dia:1/2‘

machine size:70*68*55cmmm

machine net weight:64kg

Gross weight:74.1kg

Gas Stove TGC-8

operatin step:

1.Left rotating the switch from off status to position"startlike" , press

the rotary switch, and then use the fire-shooting gun to light up

the small burning element (kindling).

2.Press the rotary switch for

5 seconds again .When release the rotary switch, the small burning

element (kindling) must have been lighten up; Otherwise, repeat the

operation above operations until it is ignited up. If the appliance was

out off using for a long period of time or it is used for the fist time, it

will take much time to be lighten up. (about 2 ~ 3 minutes).

3.When the

small burning element (kindling) is lighten up, left rotating the

switch to the biggest flame position to light up the main

burning element, then the unit is ready for use. ( If you need to set the

flame to the smallest , then left rotating the switch to the position

4.After used this appliance, please:

Shut off the main heating element by rotating the switch fromthe

biggest flame or smallest flame to the position "startlike" .Shutting of the

small heating element by rotating the rotary switch from position"startlike" 

.to .cooking-baking oven gas valve